Conference Talks (Non-Archived)

[34] A. Fassler, M. D. Bartlett, N. Kazem, C. Majidi, “Liquid-Phase GaIn Inclusions for Stretchable Conductive and Dielectric Polymer Composites,” MRS Fall Meeting, Boston, MA (2015).

[33] M. D. Bartlett, E. J. Markvicka, C. Majidi, “Soft, Multi-Functional Materials Created through Rapid Prototyping,” MRS Fall Meeting, Boston, MA (2015).

[32] N. Kazem, C. Majidi, C. Maloney, “Gelation and Mechanical Response of Patchy Rods,” MRS Fall Meeting, Boston, MA (2015).

[31] L. Finkenauer, J. Wissman, L. Deseri, C. Majidi, “Modeling of curved cantilever dielectric elastomer actuator using universal,” Society of Engineering Science Annual Meeting, West Lafayette, IN (2014).

[30] J. Wissman, C. Majidi, “Nonlinear deflection of a fixed–fixed hyperelastic beam under extreme stretch,” Society of Engineering Science Annual Meeting, West Lafayette, IN (2014).

[29] A. Fassler, C. Majidi, “Embedding frozen 3D structures of GaIn alloy in Elastic Polymer for the creation of Microfluidic Electronics” MRS Spring Meeting, San Francisco, CA (2014).

[28] C. Majidi, “Stiffness Tuning Materials for Wearable Robots,” International Human-Centered Robotics Symposium Cincinnati, OH (2013).

[27] C. Majidi, O. O’Reilly, “Adhesion and Peeling Instability of an Elastic Rod,” Society of Engineering Science Annual Meeting Providence, RI (2013).

[26] W. Shan, T. Lu, C. Majidi, “Electrically Powered Soft-Matter Composites with Tunable Elastic Rigidity,” Society of Engineering Science Annual Meeting Providence, RI (2013).

[25] W. Shan, T. Lu, C. Majidi, “Reversible Rigidity Control Using Low Melting Temperature Alloys,” APS March Meeting Baltimore, MD (2013).

[24] D. Tepayotl-Ramirez, P. Roberts, C. Majidi, “Soft-Matter Resistive Sensor for Measuring Shear and Pressure Stresses,” APS March Meeting Baltimore, MD (2013).

[23] A. Fassler, C. Majidi, “Highly Deformable Liquid Embedded Soft-Matter Capacitors and Inductors for Stretchable Electronics,” APS March Meeting Baltimore, MD (2013).

[22] R. Kramer, C. Majidi, J. Weaver, R. Wood “Manufacturing of Liquid-Embedded Elastomers for Stretchable Electronics,” APS March Meeting Baltimore, MD (2013).

[21] D. Tepayotl-Ramirez, T. Lu, C. Majidi, “Collapse of Non-Rectangular Microchannels in an Elastic Halfspace: Theory, Simulation, and Experiment,” Society of Engineering Science Annual Meeting Atlanta, GA (2012).

[20] Z. Chen, C. Majidi, D. J. Srolovitz, M. Haataja, “Continuum Elasticity Theory Approach for Spontaneous Bending and Twisting of Ribbons Induced by Mechanical Anisotropy,” Society of Engineering Science Annual Meeting Atlanta, GA (2012).

[19] Z. Chen, Q. Guo, C. Majidi, W. Chen, D. J. Srolovitz, M. Haataja, “Bistable Morphing Structures: Geometric and Mechanical Determinations,” Society of Engineering Science Annual Meeting Atlanta, GA (2012).

[18] C. Majidi “Extreme Mechanics in Soft Pneumatic Robots and Soft Microfluidic Electronics and Sensors” (Invited Talk) APS March Meeting Boston, MA (2012).

[17] R. F. Shepherd, F. Ilievski, W. Choi, A. Stokes, S. Morin, A. D. Mazzeo, R. Kramer, C. Majidi, R. J. Wood, G. M. Whitesides, “Soft Robots: Manipulation, Mobility, and Fast Actuation” APS March Meeting Boston, MA (2012).

[16] R. Kramer, C. Majidi, Y.-L. Park, J. Paik, R. J. Wood, “Liquid-Embedded Elastomer Electronics” APS March Meeting Boston, MA (2012).

[15] Z. Chen, C. Majidi, M. Haataja, D. J. Srolovitz, “Engineering Shapes in Nanotechnology: Helicity on Demand,” TMS Annual Meeting & Exhibition San Diego, CA (2011).

[14] Z. Chen, Q. Guo, C. Majidi, W. Chen, D. J. Srolovitz, M. Haataja, “Theory for the Spontaneous Bending and Helicity of Ribbons” Society of Engineering Science Annual Meeting Evanston, IL (2011).

[13] C. Majidi, R. Kramer, R. J. Wood, “Ultrasoft Electronics for Hyperelastic Strain, Pressure, and Direct Curvature Sensing” APS March Meeting Dallas, TX (2011).

[12] R. Kramer, Y.-L. Park, C. Majidi, P. Berard, R. J. Wood “Highly Compliant Pressure Sensor Using Conductive Fluid in an Elastomeric Sheet,” MRS 2010 Fall Meeting Boston, MA (2010).

[11] C. Majidi, Y.-L. Park, R. Kramer, P. Berard, R. J. Wood “Elastomers Embedded with Liquid Filled Microchannels for Robotics and Sensing,” Society of Engineering Science Annual Meeting Ames, IA (2010).

[10] C. Majidi, G. G. Adams, “Adhesion Boundary Conditions for Elastic Plates,” The Adhesion Society Annual Meeting Daytona Beach, FL (2010).

[9] J. Shi, S. Muftu, C. Majidi, K. T. Wan, “Adhesion of Compliant Cylinders,” The Adhesion Society Annual Meeting Daytona Beach, FL (2010).

[8] C. Majidi, M. Haataja, D. J. Srolovitz, “Design Principles for Nanopiezoelectric Energy Harvesting,” MRS 2009 Fall Meeting Boston, MA (2009).

[7] C. Majidi, M. Haataja, D. J. Srolovitz, “Energy Harvesting with Piezoelectric Nanobrushes: Analysis & Design Principles,” ASME/STLE International Joint Tribology Conference Memphis, TN (2009).

[6] C. Majidi, K. T. Wan, “Adhesion Between Similar and Dissimilar Thin-Walled Micro-Structures,” ASME International Conference on Micro- and Nanosystems San Diego, CA (2009).

[5] C. Majidi, G. G. Adams, “A Simplified Formulation of Adhesion Problems with Elastic Plates,” Gordon Conference on the Science of Adhesion New London, NH, poster (2009).

[4] C. Majidi, D. J. Srolovitz, M. P. Haataja, “Theoretical Analysis for the Spontaneous Bending of Piezoelectric Nanoribbons,” MRS 2008 Fall Meeting Boston, MA, poster (2008).

[3] M. Teodorescu, C. Majidi, H. Rahnejat, R. S. Fearing, “Effect of Surface Roughness on Adhesion and Friction of Microfibers in Side Contact,” ASME/STLE International Joint Tribology Conference Miami, FL
(2008).

[2] C. Majidi, R. E. Groff, S. S. Baek, B. Schubert, R. S. Fearing, “Friction and Adhesion of Micro-Fiber Arrays,” Gordon Conference on the Science of Adhesion Tilton, NH, poster (2007).

[1] M. M. Chen, C. Majidi, D. M. Doolin, S. Glaser, N. Sitar, “Design and construction of a wildfire instrumentation system using networked sensors,” Network Embedded Systems Technology Retreat Oakland, CA, poster (2003).